Citation: | Aysu Belen, Mehmet A. Belen, Merih Palandöken, et al., “Design and Realization of Broadband Active Inductor Based Band Pass Filter,” Chinese Journal of Electronics, vol. 32, no. 4, pp. 731-735, 2023, doi: 10.23919/cje.2021.00.322 |
[1] |
A. Ballo, A. D. Grasso, S. Pennisi, et al., “High-frequency low-current second-order bandpass active filter topology and its design in 28-nm FD-SOI CMOS,” Journal of Low Power Electronics and Applications, vol.10, no.3, article no.27, 2020. doi: 10.3390/jlpea10030027
|
[2] |
T. Bakken and J. Choma, “Gyrator-based synthesis of active on-chip inductances,” Analog Integrated Circuits and Signal Processing, vol.34, no.3, pp.171–181, 2003. doi: 10.1023/A:1022524630707
|
[3] |
Z. Q. Gao, J. G. Ma, M. Y. Yu, et al., “A fully integrated CMOS active bandpass filter for multiband RF front-ends,” IEEE Transactions on Circuits and Systems II:Express Briefs, vol.55, no.8, pp.718–722, 2008. doi: 10.1109/TCSII.2008.922392
|
[4] |
G. Leuzzi, V. Stornelli, and S. Del Re, “A tuneable active inductor with high dynamic range for band-pass filter applications,” IEEE Transactions on Circuits and Systems II:Express Briefs, vol.58, no.10, pp.647–651, 2011. doi: 10.1109/TCSII.2011.2164145
|
[5] |
L. N. Suresh and B. Manickam, “Multiple cascode flipped active inductor‐based tunable bandpass filter for fully integrated RF front‐end,” IET Circuits, Devices & Systems, vol.14, no.1, pp.93–99, 2020. doi: 10.1049/iet-cds.2019.0330
|
[6] |
J. Manjula and S. Malarvizhi, “Design of low power low noise tunable active inductors for multiband RF front end communication circuits,” in Proceedings of the 2013 International Conference on Communication and Signal Processing, Melmaruvathur, India, pp.868–872, 2013.
|
[7] |
B. D. H. Tellegen, “The gyrator, a new electric network element,” Philips Research Reports, vol.3, pp.81–101, 1948.
|
[8] |
M. A. S. Bhuiyan, M. B. I. Reaz, M. B. Omar, et al., “Advances in active inductor based CMOS band-pass filter,” Micro and Nanosystems, vol.10, no.1, pp.3–10, 2018. doi: 10.2174/1876402910666180524121649
|
[9] |
D. P. Patel and S. Oza, “CMOS active inductor: A technical review,” International Journal of Applied Engineering Research, vol.13, no.11, pp.9680–9685, 2018.
|
[10] |
Y. Wu, X. H. Ding, M. Ismail, et al., “RF bandpass filter design based on CMOS active inductors,” IEEE Transactions on Circuits and Systems II:Analog and Digital Signal Processing, vol.50, no.12, pp.942–949, 2003. doi: 10.1109/TCSII.2003.820235
|
[11] |
L. Pantoli, A. Leoni, Z. Marinković, et al., “Artificial neural networks approach to active inductor-based filter design,” International Journal of RF and Microwave Computer-Aided Engineering, vol.28, no.9, article no.e21568, 2018. doi: 10.1002/mmce.21568
|
[12] |
V. Kumar, R. Mehra, and A. Islam, “A 2.5 GHz low power, high-Q, reliable design of active bandpass filter,” IEEE Transactions on Device and Materials Reliability, vol.17, no.1, pp.229–244, 2017. doi: 10.1109/TDMR.2017.2652142
|
[13] |
S. Bantas and Y. Koutsoyannopoulos, “CMOS active-LC bandpass filters with coupled-inductor Q-enhancement and center frequency tuning,” IEEE Transactions on Circuits and Systems II:Express Briefs, vol.51, no.2, pp.69–76, 2004. doi: 10.1109/TCSII.2003.821521
|
[14] |
T. Mahouti, T. Yıldırım, and N. Kuşkonmaz, “Artificial intelligence-based design optimization of nonuniform microstrip line band pass filter,” International Journal of Numerical Modelling:Electronic Networks, Devices and Fields, vol.34, no.6, article no.e2888, 2021. doi: 10.1002/JNM.2888
|
[15] |
X. G. Wang, Y. H. Cho, and S. W. Yun, “A tunable combline bandpass filter loaded with series resonator,” IEEE Transactions on Microwave Theory and Techniques, vol.60, no.6, pp.1569–1576, 2012. doi: 10.1109/TMTT.2012.2189123
|
[16] |
Q. Y. Xiang, Q. Y. Feng, X. G. Huang, et al., “Electrical tunable microstrip LC bandpass filters with constant bandwidth,” IEEE Transactions on Microwave Theory and Techniques, vol.61, no.3, pp.1124–1130, 2013. doi: 10.1109/TMTT.2013.2241781
|