Citation: | ZUO Duquan, QIAN Lixia, YANG Tianen, et al., “Coupling Leveling Control Based on Fuzzy PID for Synchronous Loading System of Load-Bearing Test Bed,” Chinese Journal of Electronics, vol. 26, no. 6, pp. 1206-1212, 2017, doi: 10.1049/cje.2017.07.016 |
T.X. Gao, "Research on synchronous control of hydraulic leveling system of the load platform", M.S. thesis, North University, China, 2015.
|
J. Xue, Y.J. Yang, Y. Liu, et al., "Lateral roll angle control of UAV based on L1 adaptive control method", Journal of Northwestern Polytechnical University, Vol.33, No.1, pp.40-44, 2015.
|
R. Fales and A. Kelkar, "Robust control design for a wheel loader using h-infinity and feedback linearization based methods", ISA Transactions, Vol.48, No.3, pp.312-320, 2009.
|
S. Qi, X.S. Gao, C.Q. Yu, et al., "Simulative research of synchronization control of two hydraulic cylinder system based on single PID neuro", Fluid Power Transmission and Control, Vol.5, No.30, pp.5-9, 2008.
|
Y.B. Feng and Y. Chang, "Study on fuzzy-PID strategies for leveling lift landing leg pinpointing", Hydraulics PneumaticsSeals, Vol.9, No.9, pp.19-22, 2011.
|
Y. Koren and C.C. Lo, "Variable-gain cross-coupling controller for contouring", CIRP Annals Manufacturing Technology, Vol.40, No.1, pp.371-374, 1991.
|
C.F. Dong and Q.X. Meng, "Synchronization control of an electro-hydraulic leveling system based on adjacent cross coupling", Journal of Harbin Engineering University, Vol.33, No.3, pp.366-370, 2012.
|
B. Zi, J. Lin and S. Qian, "Localization, obstacle avoidance planning and control of cooperative cable parallel robots for multiple mobile cranes", Robotics and Computer-Integrated Manufacturing, Vol.34, No.1, pp.105-123, 2015.
|
S. Qian, B. Zi and H.F. Ding, "Dynamics and trajectory tracking control of cooperative multiple mobile cranes", Nonlinear Dynamics, Vol.83, No.1-2, pp.89-108, 2016.
|
H.Y. Yu, S.N. Huang, G. Chen, et al., "Human-robot interaction control of rehabilitation robots with series elastic actuators", IEEE Transactions on Robotics, Vol.31, No.5, pp.1089-1100, 2015.
|
S.B. Jia, Z.Q. Liu, Y.H. Hou, et al., "Multi-Stage hydraulic cylinder synchronization control accuracy of the study", Hydraulics Pneumatics & Seals, Vol.32, No.8, pp.64-68, 2012.
|
G.L. Yang, J.Z. Wang, M.X. Li, et al., "Simulation analysis of hydraulic support lifting circuit based on AMESim", Coal Mine Machinery, Vol.35, No.12, pp.247-249, 2014.
|
J.C. Renn and C. Tsai, "Development of an unconventional electro-hydraulic proportional valve with fuzzy-logic controller for hydraulic presses", International Journal of Advanced Manufacturing Technology, Vol.26, No.1, pp.10-16, 2015.
|
GB/T 3766-36:2015, Hydraulic fluid power-general rules and safety requirements for systems and their components, 2015.
|
X.B. Li and Z.Y. Sun, "Design and realization of automatic adjust level system for radar Antenna pedestal", Modern Radar, Vol.23, No.7, pp.74-76, 2006.
|
B. Shen, Z.D. Wang and X.H. Liu, "Sampled-data synchronization control of dynamical networks with stochastic sampling", IEEE Transactions on Automatic Control, Vol.57, No.10, pp.2644-2650, 2012.
|
J.H. Perez, E.A. Portilla, P.A. Nino, et al., "Design of a nonlinear controller and its intelligent optimization for exponential synchronization of a new chaotic system", OPTIKInternational Journal for Light and Electron Optics, Vol.130, No.3, pp.201-212, 2017.
|
J. Yan, "The adaptive PID control of electro-hydraulic servo loading system", Journal of Northwestern Polytechnical University, Vol.16, No.1, pp.56-60, 1998.
|
X.F. Zeng and M.H. Huang, "Simulation analysis of the drive system based on AMESim for Y32-315T hydraulic press", Modern Manufacturing Engineering, Vol.3, No.1, pp.1-3, 2013.
|