Citation: | PENG Lingjie, JIN Xiangliang, LIU Mengliang, “Design and Optimization of a Low-Noise Voltage Reference Using Chopper Stabilization Technique,” Chinese Journal of Electronics, vol. 26, no. 5, pp. 981-985, 2017, doi: 10.1049/cje.2017.03.020 |
Navid Yazdi, Farrokh Ayazi and Khalil Najafi, "Micromachined inertial sensors", Proceedings of the IEEE, Vol.86, No.8, pp.1640-1659, 1998.
|
Maenaka and Kazusuke, "MEMS inertial sensors and their applications", 5th International Conference on Networked Sensing Systems, IEEE, pp.71-73, 2008.
|
B.E. Boser and R.T. Howe, "Surface micromachined accelerometers", IEEE Journal of Solid-State Circuits, Vol.31, No.3, pp.366-375, 1996.
|
D. Liu, X. Chai, X. Su, et al., "Optimizatio and design of reference voltage for capacitive microaccelerometer", 2011 International Conference on Electronics and Optoelectronics (ICEOE), IEEE, V2-295-V2-297, 2011.
|
A. Karkkainen, S.A. Awan, J. Kyynarainen, et al., "Optimized design and process for making a DC voltage reference based on MEMS", IEEE Transactions on Instrumentation and Measurement, Vol.54, No.2, pp.563-566, 2005.
|
Boga B, Ocak I E, Kulah H, et al., "Modeling of a capacitive-MEMS accelerometer system including the noise components and verification with test results", IEEE 22nd International Conference on Micro Electro Mechanical Systems, MEMS 2009, IEEE, pp.821-824, 2009.
|
Kulah H, Chae J, Yazdi N, et al., "Noise analysis and characterization of a sigma-delta capacitive microaccelerometer", IEEE Journal of Solid-State Circuits, Vol.41, No.2, pp.352-361, 2006.
|
Razavi Behzad, Design of Analog CMOS Integrated Circuits, McGraw-Hill, Inc., 2001.
|
Chen J, Ni X and Mo B, "A low-noise CMOS readout circuit at low frequency for MEMS capacitive accelerometers", IEEE 8th International Conference on ASIC (ASICON'09), IEEE, Vol.41, No.2, pp.313-316, 2009.
|
Enz CC and Temes GC, "Circuit techniques for reducing the effects of op-amp imperfections:autozeroing, correlated double sampling, and chopper stabilization", Proceedings of the IEEE, Vol.84, No.11, pp.1584-1614, 1996.
|
Enz CC, Vittoz EA and Krummenacher F, "A CMOS chopper amplifier", IEEE Journal of Solid-State Circuits, Vol.22, No.3, pp.335-342, 1984.
|
J Shiah and S Mirabbasi, "A 5-V 290-low-noise chopperstabilized capacitive-sensor readout circuit in 0.8-CMOS using a correlated-level-shifting technique", IEEE Transactions on Circuits and Systems Ⅱ:Express Briefs, Vol.61, No.4, pp.254-258, 2014.
|
Wu J, Fedder G K and Carley L R, "A low-noise low-offset capacitive sensing amplifier for a 50-μg/√Hz monolithic CMOS MEMS accelerometer", IEEE Journal of Solid-State Circuits, Vol.39, No.5, pp.722-730, 2004.
|
Zhang L, Liu Z and He L, "System design of a low noise, low offset instrumentation amplifier with chopper stabilization", 7th International Conference on ASIC (ASICON'07), IEEE, pp.627-630, 2007.
|
Yoshida T, Masui Y, Mashimo T, et al., "A 1V low-noise CMOS amplifier using autozeroing and chopper stabilization technique", IEICE transactions on electronics, Vol.89, No.6, pp.769-774, 2006.
|