LIN Shaojiang, ZUO Xiaohua, DENG Xiangyi, “Current and Voltage Mode Resistorless Universal Biquad Filter Using a Single CCCDTA,” Chinese Journal of Electronics, vol. 27, no. 6, pp. 1250-1257, 2018, doi: 10.1049/cje.2018.08.007
Citation: LIN Shaojiang, ZUO Xiaohua, DENG Xiangyi, “Current and Voltage Mode Resistorless Universal Biquad Filter Using a Single CCCDTA,” Chinese Journal of Electronics, vol. 27, no. 6, pp. 1250-1257, 2018, doi: 10.1049/cje.2018.08.007

Current and Voltage Mode Resistorless Universal Biquad Filter Using a Single CCCDTA

doi: 10.1049/cje.2018.08.007
Funds:  This work is supported by the Hubei Natural Science Foundation (No.2018CFB718) and the National Natural Science Foundation of China (No.51372077).
More Information
  • Corresponding author: DENG Xiangyi (corresponding author) was born in Hubei Province, China. He received a bachelor degree in chemical technology from Wuhan Institute of Technology. His research interests include nano-materials preparation and their application. (Email:deng29606@sina.com)
  • Received Date: 2016-06-12
  • Rev Recd Date: 2017-05-08
  • Publish Date: 2018-11-10
  • Current mode (CM) Single-input and multi-output (SIMO) and Voltage mode (VM) Multi-input and single-output (MISO) biquad filters are proposed. The presented configurations use one Current controlled current differencing transconductance amplifier (CCCDTA) and two capacitors without any external resistors, which is easy suited for integrated circuit fabrication. The currentmode filter can realize the second-order low pass, band pass, high pass and band stop responses simultaneously. And the voltage-mode filter can realize all the standard filtering functions from the same structure. The natural frequency (ω) and quality factor (Q) of the filters can be controlled electronically by transconductance of the CCCDTA. Moreover, the proposed filters does not require any impedance matching due to its two input resistance can be independently tuned through the diverse external bias currents of CCCDTA. The influences of the CCCDTA non-idealities are also analyzed and both the active and passive sensitivities are considerably low. This design was simulated in PSPICE. Simulation results showed that their performances in power, bandwidth, out-band rejection and in-band ripple are better than the traditional. Additionally, the experiment results are provided in the paper.
  • loading
  • S. Chatterjee, Y. Tsividis and P. Kinget, “0.5-V analog circuit techniques and their application in OTA and filter design”, IEEE Journal of Solid-State Circuits, Vol.40, No.12, pp.2373-2387, 2005.
    M. Siripruchyanun and W. Jaikla, “Cascadable current-mode biquad filter and quadrature oscillator using DO-CCCⅡs and OTA”, Circuits, Systems & Signal Processing, Vol.28, No.1, pp.99-110, 2009.
    J.W. Horng, “Voltage-mode universal biquadratic filter with one input and five outputs using OTAs”, International Journal of Electronics, Vol.89, No.9, pp.729-737, 2002.
    C. Wang, Y. Zhao, Q. Zhang, et al., “A new current mode SIMO-type universal biquad employing multi-output current conveyors (MOCCⅡs)”, Radioengineering, Vol.18, No.1, pp. 45-48, 2009.
    J.W. Horng, C.L. Kaewpoonsuk and C.M. Chang, “High input impedance voltage-mode universal biquadratic filter with one input and five outputs using current conveyors”, Circuits, Systems and Signal Processing, Vol.25, No.6, pp.767-777, 2006.
    H.P. Chen, “Single CCⅡ-based voltage-mode universal filter”, Analog Integrated Circuits and Signal Processing, Vol.62, No.2, pp.259-262, 2010.
    A.Ü. Keskin and E. Hancioglu, “Current mode multifunction filter using two CDBAs”, AEU-International Journal of Electronics and Communications, Vol.59, No.8, pp.495-498, 2005.
    S. Maheshwari and I.A. KhanA, “Novel voltage-mode universal filter using only two CDBAs”, Journal of Circuits, Systems, and Computers, Vol.14, No.1, pp.159-164, 2005.
    A.Ü. Keskin, “Multi-function biquad using single CDBA”, Electrical Engineering, Vol.88, No.5, pp.353-356, 2006.
    D. Biolek, V. Biolkova and Z. Kolka, “Current-mode biquad employing single CDTA”, Indian Journal of Pure & Applied Physics, Vol.47, No.1, pp.535-537, 2009.
    A.U. Keskin, D. Biolek, E. Hancioglu, et al., “Current-mode KHN filter employ-ing current differencing transconductance amplifiers”, International Journal of Electronics and Communications (AEU), Vol.60, No.6, pp.443-446, 2006.
    W. Tangsrirat, T. Dumawipata and W. Surakampontorn, “Multiple-input single-output current-mode multifunction filter using current differencing transconductance amplifiers”, International Journal of Electronics and Communications (AEU), Vol.61, No.4, pp.209-214, 2007.
    D. Biolek, R. Senani, V. Biolkova, et al., “Active elements for analog signal processing: Classification, review, and new proposals”, Radioengineering, Vol.17, No.4, pp.15-32, 2008.
    D. Prasada, D.R. Bhaskara and A.K. Singh, “Universal currentmode biquad filter using dual output current differencing transconductance amplifier”, International Journal of Electronics and Communications (AEU), Vol.63, No.6, pp.497-501, 2009.
    M. Kumngern, P. Phatsornsiri and K. Dejhan, “Four inputs and one output current-mode multifunction filter using CDTAs and all-grounded passive components”, 10th International Conference on ICT and Knowledge Engineering, Bangkok, Thailand, Vol.5, pp.9-62, 2012.
    J. Jin and C. Wang, “Current-mode universal filter and quadrature oscillator using CDTAs”, Turkish Journal of Electrical Engineering and Computer Sciences, Vol.22, No.2, pp.276-286, 2014.
    M. Siripruchyanun and W. Jaikla, “Current-controlled current differencing transconductance amplifier and applications in continuous-time signal processing circuits”, Analog Integrated Circuits and Signal Processing, Vol.61, No.3, pp.247-257, 2009.
    W. Jaikla, F. Khateb and S. Siripongdee, “Electronically tunable current-mode biquad filter employing CCCDTAs and grounded capacitors with low input and high output impedance”, AEU-International Journal of Electronics and Communications, Vol.67, No.12, pp.1005-1009, 2013.
    W. Jaikla and M Siripruchyanun, “High output impedance current-mode universal biquadratic filter using CCCDTAs”, The Journal of KMUTNB, Vol.19, No.2, pp.136-143, 2009.
    W. Jaikla and M. Siripruchyanan, “A versatile quadrature oscillator and universal biquad filter using dual-output current controlled current differencing transconductance amplifier”, International Symposium on Communications and Information Technologies (ISCIT'06), IEEE, Bangkok, Thailand, pp.1072-1075, 2006.
    M. Siripruchyanun and W. Jaikla, “Electronically controllable current-mode universal biquad filter using single DOCCCDTA”, Circuits, Systems & Signal Processing, Vol.27, No.1, pp.113-122, 2008.
    H.C. Chien and J.M. Wang, “Dual-mode resistorless sinusoidal oscillator using single CCCDTA”, Microelectronics Journal, Vol.44, No.3, pp.216-224, 2013.
    D.R. Frey, “Log-domain filtering: An approach to currentmode filtering”, IEE Proc. Circuit Devices Syst, Vol.140, No.6, pp.406-416, 1993.
    Y. Jinke, W. Ende, C. Baoyong, et al., “A 4 MHz Gm-C filter with on chip frequency automatic tuning”, Acta Electronica Sinica, Vol.34, No.11, pp.2076-2080, 2006.
    T.Y. LO, C.S. KAO and C.C. HUNG, “A Gm-C continuoustime analog filter for IEEE802.111 a/b/g/n wire-less LANs”, Analog Integrated Circuits & Signal Processing, Vol.58, No.3, pp.197-204, 2009.
    G. Guiliang and M. Rongzeng, “Design of Gm-C filter with an accurate constant Gm bias circuit”, Jouranl of Jiangsu university (Natural Science Edition), Vol.32, No.1, pp.70-74, 2011.
    X. Ren, M. Xie, Y. Zhang, et al., “Design of 0.13μm CMOS multi-mode channel selection filter”, Microelectronics, Vol.41, No.5, pp.658-663, 2011.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (503) PDF downloads(233) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return