Citation: | DONG Ruili, TAN Yonghong, XIE Yingjie, et al., “A Dynamic Hysteresis Model of Piezoelectric Ceramic Actuators,” Chinese Journal of Electronics, vol. 32, no. 6, pp. 1278-1285, 2023, doi: 10.23919/cje.2021.00.273 |
[1] |
R. B. Mrad and H. Hu, “A model for voltage-to-displacement dynamics in piezoceramic actuators subject to dynamic-voltage excitations,” IEEE/ASME Transactions on Mechatronics, vol.7, no.4, pp.479–489, 2002. doi: 10.1109/TMECH.2002.802724
|
[2] |
H. Hu, H. M. S. Georgiou, and R. Ben-Mrad, “Enhancement of tracking ability in piezoceramic actuators subject to dynamic excitation conditions,” IEEE/ASME Transactions on Mechatronics, vol.10, no.2, pp.230–239, 2005. doi: 10.1109/TMECH.2005.844705
|
[3] |
B. X. Ding and Y. M. Li, “Hysteresis compensation and sliding mode control with perturbation estimation for piezoelectric actuators,” Micromachines, vol.9, no.5, article no.241, 2018. doi: 10.3390/mi9050241
|
[4] |
M. Al Janaideh and P. Krejčí, “Inverse rate-dependent Prandtl–Ishlinskii model for feedforward compensation of hysteresis in a piezomicropositioning actuator,” IEEE/ASME Transactions on Mechatronics, vol.18, no.5, pp.1498–1507, 2013. doi: 10.1109/TMECH.2012.2205265
|
[5] |
W. C. Liu, L. Cheng, Z. G. Hou, et al., “An inversion-free predictive controller for piezoelectric actuators based on a dynamic linearized neural network model,” IEEE/ASME Transactions on Mechatronics, vol.21, no.1, pp.214–226, 2016. doi: 10.1109/TMECH.2015.2431819
|
[6] |
D. C. Jiles and D. L. Atherton, “Theory of ferromagnetic hysteresis (invited),” Journal of Applied Physics, vol.55, no.6, pp.2115–2120, 1984. doi: 10.1063/1.333582
|
[7] |
J. D. Duan, Y. Lei, and H. Li, “Research on ferromagnetic components J-A model - a review,” in Proceedings of 2018 International Conference on Power System Technology (POWERCON), Guangzhou, China, pp.3288–3294, 2018.
|
[8] |
G. Y. Gu, L. M. Zhu, C. Y. Su, et al., “Modeling and control of piezo-actuated nanopositioning stages: A survey,” IEEE Transactions on Automation Science and Engineering, vol.13, no.1, pp.313–332, 2016. doi: 10.1109/TASE.2014.2352364
|
[9] |
I. Mayergoyz, “Mathematical models of hysteresis,” IEEE Transactions on Magnetics, vol.22, no.5, pp.603–608, 1986. doi: 10.1109/TMAG.1986.1064347
|
[10] |
Z. Li, C. Y. Su, and T. Y. Chai, “Compensation of hysteresis nonlinearity in magnetostrictive actuators with inverse multiplicative structure for Preisach model,” IEEE Transactions on Automation Science and Engineering, vol.11, no.2, pp.613–619, 2014. doi: 10.1109/TASE.2013.2284437
|
[11] |
H. Janocha and K. Kuhnen, “Real-time compensation of hysteresis and creep in piezoelectric actuators,” Sensors and Actuators A:Physical, vol.79, no.2, pp.83–89, 2000. doi: 10.1016/S0924-4247(99)00215-0
|
[12] |
K. Kuhnen, “Modeling, identification and compensation of complex hysteretic nonlinearities: A modified Prandtl-Ishlinskii approach,” European Journal of Control, vol.9, no.4, pp.407–418, 2003. doi: 10.3166/ejc.9.407-418
|
[13] |
G. Wang and G. Q. Chen, “Identification of piezoelectric hysteresis by a novel Duhem model based neural network,” Sensors and Actuators A:Physical, vol.264, pp.282–288, 2017. doi: 10.1016/j.sna.2017.07.058
|
[14] |
J. Oh and D. S. Bernstein, “Modeling and identification of rate-independent hysteresis using a semilinear duhem model,” IFAC Proceedings Volumes, vol.36, no.16, pp.1537–1542, 2003. doi: 10.1016/S1474-6670(17)34978-9
|
[15] |
G. Wang, G. Q. Chen, and F. Z. Bai, “Modeling and identification of asymmetric Bouc–Wen hysteresis for piezoelectric actuator via a novel differential evolution algorithm,” Sensors and Actuators A:Physical, vol.235, pp.105–118, 2015. doi: 10.1016/j.sna.2015.09.043
|
[16] |
A. Saleem, S. Al-Ratrout, and M. Mesbah, “A fitness function for parameters identification of Bouc-Wen hysteresis model for piezoelectric actuators,” in Proceedings of the 2018 5th International Conference on Electrical and Electronic Engineering (ICEEE), Istanbul, Turkey, pp.119–123, 2018.
|
[17] |
M. Al Janaideh, C. Y. Su, and S. Rakheja, “Development of rate independent Prandtl-Ishlinskii model for characterizing asymmetric hysteresis nonlinearities of SMA actuators,” in Proceedings of 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Xi'an, China, pp.477–481, 2008.
|
[18] |
I. D. Mayergoyz, “Dynamic Preisach models of hysteresis,” IEEE Transactions on Magnetics, vol.24, no.6, pp.2925–2927, 1988. doi: 10.1109/20.92290
|
[19] |
U. X. Tan, T. L. Win, and W. T. Ang, “Modeling piezoelectric actuator hysteresis with singularity free Prandtl-Ishlinskii model,” in Proceedings of 2006 IEEE International Conference on Robotics and Biomimetics, Kunming, China, pp.251–256, 2006.
|
[20] |
M. Al Janaideh, S. Rakheja, and C. Y. Su, “Experimental characterization and modeling of rate-dependent hysteresis of a piezoceramic actuator,” Mechatronics, vol.19, no.5, pp.656–670, 2009. doi: 10.1016/j.mechatronics.2009.02.008
|
[21] |
M. J. Yang, C. X. Li, G. Y. Gu, et al., “Modeling and compensating the dynamic hysteresis of piezoelectric actuators via a modified rate-dependent Prandtl–Ishlinskii model,” Smart Materials and Structures, vol.24, no.12, article no.125006, 2015. doi: 10.1088/0964-1726/24/12/125006
|
[22] |
R. L. Dong, Y. H. Tan, H. Chen, et al., “A neural networks based model for rate-dependent hysteresis for piezoceramic actuators,” Sensors and Actuators A:Physical, vol.143, no.2, pp.370–376, 2008. doi: 10.1016/j.sna.2007.11.023
|
[23] |
A. A. Adly and S. K. Abd-El-Hafiz, “Using neural networks in the identification of Preisach-type hysteresis models,” IEEE Transactions on Magnetics, vol.34, no.3, pp.629–635, 1998. doi: 10.1109/20.668057
|
[24] |
C. Serpico and C. Visone, “Magnetic hysteresis modeling via feed-forward neural networks,” IEEE Transactions on Magnetics, vol.34, no.3, pp.623–628, 1998. doi: 10.1109/20.668055
|
[25] |
P. Z. Li, F. Yan, C. Ge, et al., “A simple fuzzy system for modelling of both rate-independent and rate-dependent hysteresis in piezoelectric actuators,” Mechanical Systems and Signal Processing, vol.36, no.1, pp.182–192, 2013. doi: 10.1016/j.ymssp.2012.10.004
|
[26] |
X. F. Mao, Y. J. Wang, X. D. Liu, et al., “A hybrid feedforward-feedback hysteresis compensator in piezoelectric actuators based on least-squares support vector machine,” IEEE Transactions on Industrial Electronics, vol.65, no.7, pp.5704–5711, 2018. doi: 10.1109/TIE.2017.2777398
|
[27] |
Q. S. Xu, “Identification and compensation of piezoelectric hysteresis without modeling hysteresis inverse,” IEEE Transactions on Industrial Electronics, vol.60, no.9, pp.3927–3937, 2013. doi: 10.1109/TIE.2012.2206339
|
[28] |
Y. D. Tao, H. X. Li, and L. M. Zhu, “Rate-dependent hysteresis modeling and compensation of piezoelectric actuators using Gaussian process,” Sensors and Actuators A:Physical, vol.295, pp.357–365, 2019. doi: 10.1016/j.sna.2019.05.046
|