Volume 30 Issue 1
Jan.  2021
Turn off MathJax
Article Contents
TANG Shiping, MAO Junfa. Evaluation Model and Method of Margin in Electromagnetic Environmental Effects for Complex Systems[J]. Chinese Journal of Electronics, 2021, 30(1): 171-179. doi: 10.1049/cje.2020.12.006
Citation: TANG Shiping, MAO Junfa. Evaluation Model and Method of Margin in Electromagnetic Environmental Effects for Complex Systems[J]. Chinese Journal of Electronics, 2021, 30(1): 171-179. doi: 10.1049/cje.2020.12.006

Evaluation Model and Method of Margin in Electromagnetic Environmental Effects for Complex Systems

doi: 10.1049/cje.2020.12.006
Funds:

the National Natural Science Foundation of China 61831016

More Information
  • Author Bio:

    MAO Junfa  was born in 1965. He received the B.E. degree in radiation physics from the National University of Defense Technology, China, in 1985, the M.S. degree in experimental nuclear physics from Shanghai Institute of Nuclear Research, Chinese Academy of Sciences, China, in 1988, and the Ph.D. degree in electronic engineering from Shanghai Jiao Tong University, Shanghai, China, in 1992. Since 1992, he has been a faculty member of Shanghai Jiao Tong University, where he is currently a chair professor and vice president. He was a visiting scholar at the Chinese University of Hong Kong, from 1994 to 1995, and a postdoctoral researcher at the University of California, Berkeley, from 1995 to 1996. His research interests include the interconnect and package problems of integrated circuits and systems, analysis and design of microwave components and circuits. He has authored or coauthored more than 500 papers (including more than 130 IEEE journal papers).(Email: jfmao@sjtu.edu.cn)

  • Corresponding author: TANG Shiping  (corresponding author) was born in 1968. He received the B.E. degree in electronic equipment structure from Southeast University, Nanjing, China, in 1990, the M.S. degree in Control Engineering from Shanghai Jiao Tong University, Shanghai, China, in 2003. He is currently studying for a doctor's degree in electronic and information engineering from Shanghai Jiao Tong University. He is a researcher. His research interests include electromagnetic compatibility and protection technology, electromagnetic environmental effects control and standard of complex systems. He has published three monographs, more than 10 standards and more than 50 papers. (Email: shipingtange3@126.com)
  • Received Date: 2020-06-17
  • Accepted Date: 2020-07-23
  • Publish Date: 2021-01-01
  • Margin is an important index in the control of Electromagnetic environmental effects (E3) and Electromagnetic compatibility (EMC) design for systems. How to define and verify the E3 margins of complex systems such as ships and airplanes is a difficult problem. A new method of system-level E3 margin evaluation is proposed. Based on the theory of fault tree, the evaluation model of system-level margin is constructed. The complex system function is transformed into the equipment and subsystem that affect the function, and the relationship between margin of system-level and equipment is established. The change from margin of equipment to system-level margin is realized. According to the action process of Electromagnetic environment (EME), the verification and evaluation methods of EME domain, response domain and effect domain are put forward. The margin calculation formula of EME domain and typical electromagnetic energy coupling response are deduced. The problem of margin evaluation for equipment under different input parameters is solved. A typical application example is given. The verification test scheme is designed. The methods of electromagnetic energy radiation and injection are adopted. The system-level margin is analyzed by the data obtained from the effective test verification. The results show that the model and method are reasonable and feasible.
  • loading
  • [1]
    MIL-STD 464C: 2010-12-1, Electromagnetic environmental effects (E3) requirements for systems.
    [2]
    MIL-E-6051D: 1967-9-7, Military specification, electromagnetic compatibility requirements, systems.
    [3]
    I. Dipl and J. Dieter, "Requirements for an EMC system specification", International EMC Symposium, Montreux, Sweden, pp. 435-439, 1977.
    [4]
    J. Somech, "An EMC system design approach that ensures MIL-E-6051 safety margins are incorporated", International Symposium on Electromagnetic Compatibility, California, USA, pp. 68-71, 1992.
    [5]
    G.H. Wei, X.D. Pan, and X.F. Lu, "Test method for electromagnetic radiation safety margin combined injection with radiation", High Voltage Engineering, Vol. 38, No. 9, pp. 2213-2220, 2012. http://www.researchgate.net/publication/287455602_Test_method_for_electromagnetic_radiation_safety_margin_combined_injection_with_radiation
    [6]
    B. Audone, R. Cazzola and G. Barale, "Statistical evaluation of the EMC safety margin at system level", Proc. of 6th Symposium and Technical Exhibition on Electromagnetic Compatibility, Zurich, Sweden, pp. 239-245, 1985.
    [7]
    D.J. Atkins and P. Bisognin, "Design and management of spacecraft conducted safety margin", IEE Colloquium on Design Tools for EMC, London, UK, pp. 4/1-4/10, 1995.
    [8]
    Q.C. Zhao, "Design concept of electromagnetic compatibility", Acta Electronica Sinica, Vol. 48, No. 02, pp. 238-242, 2020.
    [9]
    W.S. Lee, D.L. Grosh and F.A. Tillman, et al. , "Fault tree analysis, methods, and applications & a review", IEEE Transactions on Reliability, Vol. R-34, No. 3, pp. 194-203, 1985. doi: 10.1109/TR.1985.5222114
    [10]
    L. Xing and S.V. Amari, Fault Tree Analysis, Springer, London, UK, pp. 23-45, 2008.
    [11]
    B. Kuhlman, "Lightning transient response and margin analysis of aircraft circuits", Proc of 1992 IEEE International Symposium on Electromagnetic Compatibility, California, USA, pp. 72-76, 1992.
    [12]
    R. Kichouliya, Devender, and V.V. Ramasarma, et al., "Hazards of electromagnetic radiation to ordnance (HERO) assessment of electro-explosive devices and validation of extrapolation method for estimation of the safety margin at HERO electromagnetic environments", IEEE International Symposium on EMC, California, USA, pp. 946-953, 2011.
    [13]
    P. Xiao, J. Wang, and M.X. Ling, et al. , "An efficient approach for predicting electromagnetic interference emission of motor and its driver system under field-circuit and TL coupling", Acta Electronica Sinica, Vol. 45, No. 10, pp. 2449-2456, 2017. http://www.researchgate.net/publication/321705128_An_Efficient_Approach_for_Predicting_Electromagnetic_Interference_Emission_of_Motor_and_Its_Driver_System_Under_Field-Circuit_and_TL_Coupling
    [14]
    J. Tian, Y.J. Xie, and H.Q. Xin, et al. , "A synthetical EMC evaluation method for a complicated system based on a novel TOPSIS approach", Acta Electronica Sinica, Vol. 41, No. 1, pp. 105-109, 2013. (in Chinese) http://www.cqvip.com/QK/90131X/201301/44867847.html
    [15]
    G.H. Bao, D.L. Su and F. Dai, et al. , "Design of electromagnetic compatibility prediction platform for aircraft fuel quantity indication system based on hardware in the loop simulation", Journal of Electronic Measurement and Instrumentation, Vol. 28, No. 2, pp. 152-158, 2014. http://en.cnki.com.cn/Article_en/CJFDTOTAL-DZIY201402008.htm
    [16]
    J.W. Xiang, K. Futatsugi, and Y.X. He, "Fault tree and formal methods in system safety analysis", Proceedings of the Fourth International Conference on Computer and Information Technology, Wuhan, China, pp. 1108-1115, 2004.
    [17]
    E. Genender, H. Garbe, and F. Sabath, "Probabilistic risk analysis technique of intentional electromagnetic interference at system level", IEEE Transactions on Electromagnetic Compatibility, Vol. 56, No. 1, pp. 200-207, 2014. doi: 10.1109/TEMC.2013.2272944
    [18]
    S.H. Liu, "Effect of electromagnetic environment to weaponry and its trend of development", Journal of Institute of Command and Technology, Vol. 16, No. 1, pp. 1-6, 2005. http://en.cnki.com.cn/Article_en/CJFDTOTAL-XYZH200501000.htm
    [19]
    Y.F. Wang, Y.X. Zhao, and W. Yang, et al. , "Modeling of transmission matrix and crosstalk cancellation method and effect analysis of coupled transmission line", Acta Electronica Sinica, Vol. 47, No. 5, pp. 1129-1135, 2019. http://en.cnki.com.cn/Article_en/CJFDTotal-DZXU201905021.htm
    [20]
    X.D. Pan, G.H. Wei, and H.J. Wan, et al. , "Research on several test issues of electromagnetic radiation susceptibility for electronic equipment", High power laser and particle beams, Vol. 32, No. 7, pp. 073002-1-073002-7, 2020.
    [21]
    D.Z. Wu, Analysis of Signals and Linear Systems, Higher Education Press, Beijing, China, pp. 245, 2005. (in Chinese)
    [22]
    Y.J. Zhang and Q. S, "Preconditioned Bi-conjugate gradient method of large-scale sparse complex linear equation group", Chinese Journal of Electronics, Vol. 20, No. 1, pp. 192-194, 2011. http://cje.ejournal.org.cn/en/article/id/4955
    [23]
    J. Liu, Z.J. Zhang, and Y. Cao, et al. , "A closed-form expression for false alarm rate of adaptive MIMO-GLRT detector with distributed MIMO radar", Signal Processing, Vol. 93, No. 9, pp. 2771-2776, 2013. doi: 10.1016/j.sigpro.2013.03.001
    [24]
    Z. Chen, Y. Zhang, and A. Hu, et al. , "Bit-error-rate analysis of UWB radio using BPSK modulation over inter-chip radio channels for wireless chip area networks", IEEE Transactions on Wireless Communications, Vol. 8, No. 5, pp. 2379-2387, 2009. doi: 10.1109/TWC.2009.070518
    [25]
    X.Y. Zhang, D.L. Su and F. Dai, et al., "Analysis of the method for EMC radiation safety margin test", Proceedings of Eighth International Symposium on Antennas, Propagation and EM Theory, Beijing, China, pp. 1224-1227, 2008.
    [26]
    W.L. Stutzman, and G.A. Thiele, Antenna Theory and Design, Wiley, United States, USA, pp. 70-78, 2012.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(10)

    Article Metrics

    Article views (108) PDF downloads(8) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return