Field-Line-Circuit Coupling Based Method for Predicting Radiated Electromagnetic Emission of IGBT-PMSM Drive System

XIAO Pei; HE Jiagang; PENG Zishun; LI Jiawei; QIU Yongfeng; LIU Zhu; LI Gaosheng

doi:10.1049/cje.2021.04.010

Volume 30 Issue 3

May 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Electronics > 2021 > 30(3): 561-569

XIAO Pei, HE Jiagang, PENG Zishun, et al., “Field-Line-Circuit Coupling Based Method for Predicting Radiated Electromagnetic Emission of IGBT-PMSM Drive System,” Chinese Journal of Electronics, vol. 30, no. 3, pp. 561-569, 2021, doi: 10.1049/cje.2021.04.010

Citation:

XIAO Pei, HE Jiagang, PENG Zishun, et al., “Field-Line-Circuit Coupling Based Method for Predicting Radiated Electromagnetic Emission of IGBT-PMSM Drive System,” Chinese Journal of Electronics, vol. 30, no. 3, pp. 561-569, 2021, doi: 10.1049/cje.2021.04.010

Citation:

PDF( 2293 KB)

Field-Line-Circuit Coupling Based Method for Predicting Radiated Electromagnetic Emission of IGBT-PMSM Drive System

doi: 10.1049/cje.2021.04.010

1. College of Electrical and Information Engineering, Hunan University, Changsha 410082, China;
2. School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China

Funds:

This work is supported by the National Natural Science Foundation of China (No.51675086), the Fellowship of China Postdoctoral Science Foundation (No.2020M672482), and the Open Foundation of the Science and Technology on Electronic Test ＆ Measurement Laboratory (No.6142001180205).

Received Date: 2020-07-09

Abstract

Abstract

Electric drive system with Insulated gate bipolar transistor (IGBT) power device is widely used in Electric vehicle (EV), which consists of inverter, cables and Permanent magnet synchronous motor (PMSM). Due to the fast switching in di/dt and dv/dt of IGBT device, the system produces serious radiated Electromagnetic interference (EMI) through the interconnection cables. Thus, modeling of EMI source, propagation path and load PMSM is the key to accurately evaluate the system’s radiation level. In addition, the system’s radiated EMI involves the integrated calculation of circuit, cable and electromagnetic field, which cannot be solved by using a single circuit or electromagnetic calculation method. Therefore, this paper develops an effective field-linecircuit coupling based method to investigate the radiated EMI problems for IGBT-PMSM drive system, which is validated by experimental measurement. Besides, the impact of power cable parameters on radiated EMI is discussed. The proposed approach has guiding significance for electromagnetic compatibility design of EV.
- Radiated EMI,
- Cables,
- IGBT-PMSM drive system,
- Field-line-circuit coupling

FullText(HTML)

References(27)

References

Zhao Q C, “Design concept of electromagnetic compatibility”, Acta Electronica Sinica, Vol.48, No.2, pp.238–242, 2020. (in Chinese)

Qi L and Cui X, “Electromagnetic transient analysis of cable system based on FDTD method”, Acta Electronica Sinica, Vol.34, No.3, pp.525–529, 2006. (in Chinese)

Ji Y C, Qiu Y, Chen W, et al., “Analysis of EMC problems of the vehicular multiple antennas system”, Acta Electronica Sinica, Vol.30, No.4, pp.560–563, 2002. (in Chinese)

Xiao P, Wang J, Ling M X, et al., “An efficient approach for predicting electromagnetic interference emission of motor and its driver system under field-circuit and TL coupling”, Acta Electronica Sinica, Vol.45, No.10, pp.2449–2456, 2017.

B. Zhang and S. Wang, “A survey of EMI research in power electronics systems with wide-bandgap semiconductor devices”, IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol.8, No.1, pp.626–643, 2020.

L. Middelstaedt, B. Strauss, A. Chupryn, et al., “Investigation of the root causes of electromagnetic noise of an interleaved DC-DC converter with GaN or Si transistors and corresponding optimization strategies”, IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol.8, No.3, pp.2759–2774, 2019.

Ala G, Di Piazza M C, Tine G, et al., “Evaluation of radiated EMI in 42-V vehicle electrical systems by FDTD simulation”, IEEE Transactions on Vehicular Technology, Vol.56, No.4, pp.1477–1484, 2007.

Han D, Morris C T, Lee W, et al., “A case study on common mode electromagnetic interference characteristics of GaN HEMT and Si MOSFET power converters for EV/HEVs”, IEEE Transactions on Transportation Electrification, Vol.3, No.1, pp.168–179, 2017.

Zhu H, Lai J S, Hefner A R, et al., “Modeling-based examination of conducted EMI emissions from hard and softswitching PWM inverters”, IEEE Transactions on Industry Applications, Vol.37, No.5, pp.1383–1393, 2001.

Chien-Hsuan Chang, Hung-Liang Cheng and En-Chih Chang, “Using the buck-interleaved buck-boost converter to implement a step-up/down inverter”, Engineering Computations, Vol.34, No.2, pp.272–284, 2017.

Guo X, Yang Y and Zhu T, “ESI: A novel three-phase inverter with leakage current attenuation for transformerless PV systems”, IEEE Transactions on Industrial Electronics, Vol.65, No.4, pp.2967–2974, 2018.

Gao X, Su D, “Suppression of a certain vehicle electrical field and magnetic field radiation resonance point”, IEEE Transactions on Vehicular Technology, Vol.67, No.1, pp.226–234, 2017.

Kim T, Feng D, Jang M, et al., “Common mode noise analysis for cascaded boost converter with silicon carbide devices”, IEEE Transactions on Power Electronics, Vol.32, No.3, pp.1917–1926, 2016.

Ardon V, Aime J, Chadebec O, et al., “EMC modeling of an industrial variable speed drive with an adapted PEEC method”, IEEE Transactions on Magnetics, Vol.46, No.8, pp.2892–2898, 2010.

Liu Q, Wang F and Boroyevich D, “Conducted-EMI prediction for AC converter systems using an equivalent modular-terminal-behavioral (MTB) source model”, IEEE Transactions on Industry Applications, Vol.43, No.5, pp.1360–1370, 2007.

Lai J S, Huang X, Pepa E, et al., “Inverter EMI modeling and simulation methodologies”, IEEE Transactions on Industrial Electronics, Vol.53, No.3, pp.736–744, 2006.

Traub F, Hansen J, Ackermann W, et al., “Generation of physical equivalent circuits using 3D simulations”, 2012 IEEE International Symposium on Electromagnetic Compatibility, Pittsburgh, USA, pp.486–491, 2012.

Zhai L, Bondarenko N, Xu B, et al., “A measurement-based model of the electromagnetic emissions from a power inverter”, IEEE Transactions on Power Electronics, Vol.30, No.10, pp.5522–5531, 2015.

Liu Z, Huang X, Lee F C, et al., “Package parasitic inductance extraction and simulation model development for the highvoltage cascode GaN HEMT”, IEEE Transactions on Power Electronics, Vol.29, No.4, pp.1977–1985, 2014.

Nabil A. Ahmed, Manabu Ishitobi, Soon Kurl Kwon, et al., “Latest development of transformer parasitic parameters and lossless inductive snubber-assisted ZCS-PFM DC-DC converter for microwave power generation”, 37th IEEE Power Electronics Specialists Conference, Jeju, Kerea, pp.273–278, 2017.

Liu T J, Thomas T. Y. Wong and Z. John Shen, “A new characterization technique for extracting parasitic inductances of SiC power MOSFETs in discrete and module packages based on two-port S-parameters measurement”, IEEE Transactions on Power Electronics, Vol.33, No.11, pp.9819–9833, 2018.

Nejadpak A and Mohammed O A, “Physics-based modeling of power converters from finite element electromagnetic field computations”, IEEE Transactions on Magnetics, Vol.49, No.1, pp.567–576, 2013.

L Qiao, Jiang D, Liu Z Z, et al., “A phase-shifted zero-CM PWM for circulating current reduction in two paralleled inverters with coupled inductors”, IEEE Transactions on Transportation Electrification, Vol.6, No.1, pp.95–104, 2020.

Heldwein M L, Dalessandro L, Kolar J W, “The three-phase common-mode inductor: Modeling and design issues”, IEEE Transactions on Industrial Electronics, Vol.58, No.8, pp.3264–3274, 2011.

Andrieu G, Reineix A, Bunlon X, et al., “Extension of the equivalent cable bundle method for modeling electromagnetic emissions of complex cable bundles”, IEEE Transactions on Electromagnetic Compatibility, Vol.51, No.1, pp.108–118, 2009.

F. M. Tesche, M. V. Ianoz and T. Karlsson, EMC Analysis Methods and Computational Models, Hoboken, NJ, USA:Wiley, 1997.

Xiao P, Du P A and Zhang B, “An analytical method for radiated electromagnetic and shielding effectiveness of braided coaxial cable”, IEEE Transactions on Electromagnetic Compatibility, Vol.61, No.1, pp.121–127, 2019.

Relative Articles

Supplements(0)

Cited By

Proportional views