Volume 30 Issue 1
Jan.  2021
Turn off MathJax
Article Contents
YAN Ruqiang, SHEN Fei, ZHOU Mengjie, “Induction Motor Fault Diagnosis Based on Transfer Principal Component Analysis,” Chinese Journal of Electronics, vol. 30, no. 1, pp. 18-25, 2021, doi: 10.1049/cje.2020.11.003
Citation: YAN Ruqiang, SHEN Fei, ZHOU Mengjie, “Induction Motor Fault Diagnosis Based on Transfer Principal Component Analysis,” Chinese Journal of Electronics, vol. 30, no. 1, pp. 18-25, 2021, doi: 10.1049/cje.2020.11.003

Induction Motor Fault Diagnosis Based on Transfer Principal Component Analysis

doi: 10.1049/cje.2020.11.003
Funds:

the National Natural Science Foundation of China 51575102

More Information
  • Author Bio:

    SHEN Fei   received the B.S. and M.S. degrees from Southeast University in 2014 and 2016 respectively. Now he is pursuing the Ph.D. degree in School of Instrument Science and Engineering, Southeast University. His main research interest is machine fault diagnosis. (Email: sfseu0311@163.com)

    ZHOU Mengjie   received the B.S. degree from School of Electrical Engineering and Automation, Anhui University in 2015, and received the M.S. degree from School of Instrument Science and Engineering, Southeast University in 2018. His main research interest is machine learning. (Email: mjz2861@163.com)

  • Corresponding author: YAN Ruqiang  (corresponding author) received the B.S. and M.E. degrees from University of Science and Technology of China in 1997 and 2002 respectively, and received the Ph.D. degree in 2007 from University of Massachusetts, Amherst. Now he is a professor and Ph.D. supervisor in Xi'an Jiaotong University. His main research interests include machine condition monitoring and fault diagnosis, signal processing, and wireless sensor networks. (Email: yanruqiang@xjtu.edu.cn)
  • Received Date: 2019-08-26
  • Accepted Date: 2020-05-12
  • Publish Date: 2021-01-01
  • This paper presents a transfer learning-based approach for induction motor fault diagnosis, where the Transfer principal component analysis (TPCA) is proposed to improve diagnostic performance of the induction motors under various working conditions. TPCA is developed to minimize the distribution difference between training and testing data by mapping cross-domain data into a shared latent space in which domain difference can be reduced. The trained model can achieve a good performance in testing data by using the learned features consisting of common latent principal components. Experimental results show that the proposed approach outperforms traditional machine learning techniques and can diagnose induction motor fault under various working conditions effectively.
  • loading
  • [1]
    A. Glowacz, W. Glowacz, Z. Glowacz, et al., "Early fault diagnosis of bearing and stator faults of the single-phase induction motor using acoustic signals", Measurement, Vol. 113, pp. 1–9, 2018. http://www.sciencedirect.com/science/article/pii/S0263224117305432
    [2]
    W. Sun, R. Zhao, R. Yan, et al., "Convolutional discriminative feature learning for induction motor fault diagnosis", IEEE Trans. Ind. Informatics, Vol. 13, No. 3, pp. 1350–1359, 2017. doi: 10.1109/TII.2017.2672988
    [3]
    J. Wang, H. Peng, M. Tu, et al., "A fault diagnosis method of power systems based on an improved adaptive fuzzy spiking neural P systems and PSO algorithms", Chinese Journal of Electronics, Vol. 25, No. 2, pp. 320–327, 2016. doi: 10.1049/cje.2016.03.019
    [4]
    B. Yang, Y. Lei, F. Jia, et al., "An intelligent fault diagnosis approach based on transfer learning from laboratory bearings to locomotive bearings", Mech. Syst. Signal Process., Vol. 122, pp. 692–706, 2019. doi: 10.1016/j.ymssp.2018.12.051
    [5]
    F. Shen, J. Xu, C. Sun, et al., "Transfer between multiple working conditions: A new TCCHC-based exponential semi-deterministic extended Kalman filter for bearing remaining useful life prediction", Measurement, Vol. 142, pp. 148–162, 2019. doi: 10.1016/j.measurement.2019.04.074
    [6]
    H. Yang, X. Li, Z. Wang, et al., "A novel sensor deployment method based on image processing and wavelet transform to optimize the surface coverage in WSNs", Chinese J. Electron., Vol. 25, No. 3, pp. 495–502, 2016. doi: 10.1049/cje.2016.05.015
    [7]
    W. Sun, S. Shao, R. Zhao, et al., "A sparse auto-encoder-based deep neural network approach for induction motor faults classification", Measurement, Vol. 89, pp. 171–178, 2016. doi: 10.1016/j.measurement.2016.04.007
    [8]
    R. Zhao, R. Yan, Z. Chen, et al., "Deep learning and its applications to machine health monitoring", Mechanical Systems and Signal Processing, Vol. 115, pp. 213–237, 2019. doi: 10.1016/j.ymssp.2018.05.050
    [9]
    T. Ince, S. Kiranyaz, L. Eren, et al., "Real-time motor fault detection by 1-D convolutional neural networks", IEEE Trans. Ind. Electron., Vol. 63, No. 11, pp. 7067–7075, 2016. doi: 10.1109/TIE.2016.2582729
    [10]
    B. Gou, Y. Xu, Y. Xia, et al., "An intelligent time-adaptive data-driven method for sensor fault diagnosis in induction motor drive system", IEEE Trans. Ind. Electron., Vol. 66, No. 12, pp. 9817–9827, 2019. doi: 10.1109/TIE.2018.2880719
    [11]
    K. Weiss, T. M. Khoshgoftaar and D. D. Wang, "A survey of transfer learning", J. Big Data, Vol. 3, No. 1, Article No. 9, 2016. doi: 10.1186/s40537-016-0043-6
    [12]
    M. Wang and W. Deng, "Deep visual domain adaptation: A survey", Neurocomputing, Vol. 312, pp. 135–153, 2018. doi: 10.1016/j.neucom.2018.05.083
    [13]
    Y. U. Lasheng, W. U. Xu and Y. Yu, "An online education data classification model based on Tr_MAdaBoost algorithm", Chinese J. Electron., Vol. 28, No. 1, pp. 25–32, 2019. http://www.cnki.com.cn/Article/CJFDTotal-EDZX201901004.htm
    [14]
    J. Xie, L. Zhang, L. Duan, et al., "On cross-domain feature fusion in gearbox fault diagnosis under various operating conditions based on transfer component analysis", 2016 IEEE International Conference on Prognostics and Health Management, pp. 1–6, 2016. http://ieeexplore.ieee.org/document/7542845
    [15]
    M. Zhang, D. Wang, W. Lu, et al., "A deep transfer model with wasserstein distance guided multi-adversarial networks for bearing fault diagnosis under different working conditions", IEEE Access, Vol. 7, pp. 65303–65318, 2019. doi: 10.1109/ACCESS.2019.2916935
    [16]
    T. Jollife and J. Cadima, "Principal component analysis: A review and recent developments", Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 374, No. 2065. pp. 1–16, 2016. http://pubmedcentralcanada.ca/pmcc/articles/PMC4792409/
    [17]
    B. Jiang, J. Xiang, Y. Wang, et al., "Rolling bearing fault diagnosis approach using probabilistic principal component analysis denoising and cyclic bispectrum", JVC/Journal Vib. Control, Vol. 22, No. 10, pp. 2420–2433, 2016. doi: 10.1177/1077546314547533
    [18]
    J. Wang, R. X. Gao, Z. Yuan, et al., "A joint particle filter and expectation maximization approach to machine condition prognosis", J. Intell. Manuf., Vol. 30, No. 2, pp. 605–621, 2019. doi: 10.1007/s10845-016-1268-0
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(5)  / Tables(5)

    Article Metrics

    Article views (557) PDF downloads(25) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return